跪求指导~~！！

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有帐号？立即加入SketchUp吧！

x

本人新手，布置如何建立这种类型的屋面，求赐教。最好能告诉我用哪款插件，以及使用方法，谢啦~~

wine-skin · 2011-3-16 14:12:08

昨天刚发了一组教程，你搜一下。老怪写的。

对方所 · 2011-3-17 00:01:43

RE: 跪求指导~~！！

It is a example, hopefully it is helpful. And slao you'd better to do some research in this bar, there are alot threads talking about how to build a curvy surface, like 老怪's threads.

1-draw 3d curves based on your design

2- use extrusion tools

3- extrude edge by rails

first, pick the profile
second, pick the first and second rails
then, pick the merge profile...
later on, you will get the surface. if there are any dialogs appears just select' no'

use soften edges to build nicel looking faces.

then, repeating to get all surface...

here is the plugins....

extrudeTools_20100517.zip (138.04 KB, 下载次数: 47)

lcc大海 · 2011-3-17 13:14:49

回复对方所的帖子

Thanks a lot~ I got it!~~
Another question is ,How to increasing the thickness of the roof by the "Extrude Tools"

对方所 · 2011-3-17 22:09:47

That is SCF POWERNAR, see the attachment.

Next time, b4 you ask the questions, better to do some research, this is a quite nice bar and there are a lot infor. here.

Good luck!